DSMC2/RANGER - RED MINI-MAG 960GB V3 SSD Firmware Update

NOTE: The RED MINI-MAG 960GB V3 requires that your camera is on firmware v6.3.75 or later.

The RED MINI-MAG 960GB V3 is eligible for an update that optimizes the SSD. To identify if your RED MINI-MAG 960GB is V3 (and therefore eligible for the update), follow the instructions below:

1. Insert the RED MINI-MAG into the camera.
2. Go to Menu > Media > Device > More Info..., and identify the Model Number. If the SSD model number is "RED 960GB V3", then the SSD is eligible for the firmware update.

Update RED MINI-MAG 960GB Firmware

1. Insert the RED MINI-MAG (SSD) into the camera.
2. Format the SSD. 
3. Properly eject the SSD from the camera.
4. Connect the SSD to your computer.
5. Download the RED MINI-MAG 960GB V3 firmware (Version 3.01.0, 5/14/2019) here. 
6. Unzip the firmware update file.
7. Copy the .rmf file to the top level of the SSD directory.
8. Eject or unmount the SSD, and then remove the SSD.
9. Insert the SSD with .rmf file into your camera.
10. Go to Menu > Settings > Maintenance > Upgrade > Media. 
11. Select Yes and verify that the update completes.
12. Remove the SSD from the camera when prompted by the on-screen instructions.
13. Re-insert the SSD into the camera.
14. Go to Menu > Media > Device > More Info..., and verify that the Media Firmware Revision is 0301-000.
15. Format the RED MINI-MAG before use.